VISUAL MOLD INSPECTION

MOLD and mildew are present everywhere, especially in our homes. If the caulking or sealing in your shower has ever turned pink or black, you've seen mold. If you've ever pulled clothes from the washer that have sat too long, or gym clothes from a forgotten gym bag, you've smelled mildew. More people are more aware of MOLD and mildew in their HOMES and this has created more litigation, more information and more controversy on the topic. While no one wants either fungus in their home, everyone has it. The extent and type of FUNGI is more important, actually, than how much of it you see.

HOME ENVIRO MOLD INSPECTOR will personally explore all your smallest spaces, least used spaces and most used places in your home. WE look for damp or wet conditions, low circulation and humidity in your garage, crawlspace, attic and laundry room. We also check all the under-counter spaces and corners of your bathrooms and under and around any other sinks in your house. MOLD GROWS in places such as the back side of dry wall, wallpaper, or paneling, the top side of ceiling tiles, and the underside of carpets and pads.

HOME ENVIRO check around all your pipes, the surface of walls behind furniture (where condensation forms), inside ductwork, and in roof materials above ceiling tiles. HOME ENVIRO MOLD INSPECTORS can do for you is to contain the MOLD from spreading into uncontaminated areas, kill the MOLD, REMOVE the DEAD MOLD, and protect the cleaned out area against future mold infestations by applying MOLD PREVENTION product. And educating owners and residents on indoor air circulation and property care to avoid any future problems with TOXIC MOLD or mildew.

First, Home Enviro identify the problem.

During the MOLD INSPECTION we will pinpoint the problem areas in your home or building using our latest tools and techniques.

Second, Home Enviro determine the cause of the mold growth.

MOLD requires water or a source of excessive moisture to grow, That's why Home Enviro is pleased to offer our Thermal Imaging Infrared Camera during our MOLD INSPECTION to allows us evaluate if a non-visible area is wet, even if there is no visible surface damage. Our professionals MOLD INSPECTORS will test your property for MOLD GROETH using the latest tools and techniques.

Third, outline our recommendations.

Home Enviro provide expert advice and MOLD REMOVAL consultation specifically tailored to your unique situation.

Buying a new home or a foreclosure?

Photo slideshow.

Your Home Enviro On-Site Visual Mold Inspection includes:

Additional Home Enviro Mold Evaluation Services:

Mold Inspection

• A typical 1,500 square foot home MOLD INSPECTION takes approximately 2 hours to complete
• A standard inspection would be two indoor air samples and one outdoor sample. The outdoor sample establishes a reference or baseline for normal MOLD levels in an area, that are then compared to the indoor samples
• For larger houses or commercial properties, the number of samples will vary
• For a limited or spot inspection, such as a bedroom closet, a single sample may be all that is required
• We highly recommend that you are present at the time of the MOLD INSPECTION as part of our service is to educate you on your MOLD REMEDIATION options
• Turnaround time for sample analysis by a certified lab is 1 to 2 working days
• Overnight or same day MOLD INSPECTION and lab reports are available